Blue Winds is now ready to be turned over. She is unbolted from
the strong and lifted..... |
A rope is tied around her and she is eased over as the gravity
pulls the keel towards the ground.... |
She is over and ready to be set up and leveled... |
The temporary framing is removed from the inside of the hull
and she is ready to be fiberglassed. |
The foam is removed from the keel and floor section...... |
A series of 12 cabin sole supports are built that will be fiberglassed
into the bilge... |
The sole supports are in place.... |
A plywood cabin sole is put in place...the white board in the
center is made up of laminated 2 x 4's set out across four of
the sole supports to spread the pressure of the mast which sits
on it.... |
This is the corner post for the cabin top....the plywood on
the bottom is the deck. |
Ceiling beams were laminated spruce and mahogany. |
